View 74LVC1G11_245742.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74LVC1G11
Single 3-input AND gate
Rev. 01 -- 30 November 2004 Product data sheet
1. General description
The 74LVC1G11 is a high-performance, low-voltage, Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. The input can be driven from either 3.3 V or 5 V devices. This feature allows the use of this device in a mixed 3.3 V and 5 V environment. This device is fully specified for partial power-down applications using Ioff. The Ioff circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. Schmitt-trigger action at all inputs makes the circuit highly tolerant to slower input rise and fall times. The 74LVC1G11 provides a single 3-input AND gate.
2. Features
s s s s Wide supply voltage range from 1.65 V to 5.5 V 5 V tolerant inputs for interfacing with 5 V logic High noise immunity Complies with JEDEC standard: x JESD8-7 (1.65 V to 1.95 V) x JESD8-5 (2.3 V to 2.7 V) x JESD8-B/JESD36 (2.7 V to 3.6 V). 24 mA output drive (VCC = 3.0 V) ESD protection: x HBM EIA/JESD22-A114-B exceeds 2000 V x MM EIA/JESD22-A115-A exceeds 200 V. CMOS low power consumption Latch-up performance exceeds 250 mA Direct interface with TTL levels Multiple package options Specified from -40 C to +85 C and -40 C to +125 C.
s s
s s s s s
Philips Semiconductors
74LVC1G11
Single 3-input AND gate
3. Quick reference data
Table 1: Quick reference data GND = 0 V; Tamb = 25 C; tr = tf 2.5 ns. Symbol Parameter Conditions Min 1.0 VCC = 3.3 V
[1] [2]
Typ 2.6 4 13
Max 4.3 -
Unit ns pF pF
tPHL, tPLH propagation delay A, CL = 50 pF; VCC = 3.3 V B and C to Y CI CPD
[1]
input capacitance power dissipation capacitance
-
CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; (CL x VCC2 x fo) = sum of the outputs. The condition is VI = GND to VCC.
[2]
4. Ordering information
Table 2: Ordering information Package Temperature range Name 74LVC1G11GW 74LVC1G11GV -40 C to +125 C -40 C to +125 C SC-88 SC-74 Description plastic surface mounted package; 6 leads plastic surface mounted package; 6 leads Version SOT363 SOT457 Type number
5. Marking
Table 3: Marking Marking code VU V11 Type number 74LVC1G11GW 74LVC1G11GV
6. Functional diagram
& 1
1 3 6
A B C
001aac033
Y
4
3 6
4
001aac029
Fig 1. Logic symbol
Fig 2. IEC logic symbol
9397 750 14209
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 -- 30 November 2004
2 of 14
Philips Semiconductors
74LVC1G11
Single 3-input AND gate
A
B
Y
C
001aac030
Fig 3. Logic diagram
7. Pinning information
7.1 Pinning
A GND
1 2
6
C VCC Y
11
5
B
3
001aac032
4
Fig 4. Pin configuration
7.2 Pin description
Table 4: Symbol A GND B Y VCC C Pin description Pin 1 2 3 4 5 6 Description data input ground (0 V) data input data output supply voltage data input
9397 750 14209
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 -- 30 November 2004
3 of 14
Philips Semiconductors
74LVC1G11
Single 3-input AND gate
8. Functional description
8.1 Function table
Table 5: Input A H L X X
[1]
Function table [1] Output B H X L X C H X X L Y H L L L
H = HIGH voltage level; L = LOW voltage level; X = don't care.
9. Limiting values
Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol VCC VI VO IIK IOK IO ICC, IGND Tstg Ptot
[1] [2]
Parameter supply voltage input voltage output voltage input diode current output diode current
Conditions
[1]
Min -0.5 -0.5 -0.5 -0.5 -65
Max +6.5 +6.5 +6.5 -50 50 50 100 +150 250
Unit V V V mA mA mA mA C mW
active mode Power-down mode VI < 0 V VO > VCC or VO < 0 V
[1] [2] [1] [2]
VCC + 0.5 V
output source or sink VO = 0 V to VCC current VCC or GND current storage temperature power dissipation Tamb = -40 C to +125 C
-
The input and output voltage ratings may be exceeded if the input and output current ratings are observed. When VCC = 0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
9397 750 14209
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 -- 30 November 2004
4 of 14
Philips Semiconductors
74LVC1G11
Single 3-input AND gate
10. Recommended operating conditions
Table 7: Symbol VCC VI VO Recommended operating conditions Parameter supply voltage input voltage output voltage active mode Power-down mode; VCC = 0 V Tamb tr, tf ambient temperature input rise and fall times VCC = 1.65 V to 2.7 V VCC = 2.7 V to 5.5 V Conditions Min 1.65 0 0 0 -40 0 0 Typ Max 5.5 5.5 VCC 5.5 +125 20 10 Unit V V V V C ns/V ns/V
11. Static characteristics
Table 8: Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Tamb = -40 C to +85 VIH C [1] 0.65 x VCC 1.7 2.0 0.7 x VCC VCC - 0.1 1.2 1.9 2.2 2.3 3.8 1.54 2.15 2.50 2.62 4.11 0.07 0.12 0.17 0.33 0.39 0.1 0.1 0.7 0.8 0.3 x VCC 0.10 0.45 0.30 0.40 0.55 0.55 5 10 V V V V V V V V V V V V V V V V V V V A A VCC = 2.3 V to 2.7 V VCC = 2.7 V to 3.6 V VCC = 4.5 V to 5.5 V VIL LOW-level input voltage VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 2.7 V to 3.6 V VCC = 4.5 V to 5.5 V VOH HIGH-level output voltage VI = VIH or VIL IO = -100 A; VCC = 1.65 V to 5.5 V IO = -4 mA; VCC = 1.65 V IO = -8 mA; VCC = 2.3 V IO = -12 mA; VCC = 2.7 V IO = -24 mA; VCC = 3.0 V IO = -32 mA; VCC = 4.5 V VOL LOW-level output voltage VI = VIH or VIL IO = 100 A; VCC = 1.65 V to 5.5 V IO = 4 mA; VCC = 1.65 V IO = 8 mA; VCC = 2.3 V IO = 12 mA; VCC = 2.7 V IO = 24 mA; VCC = 3.0 V IO = 32 mA; VCC = 4.5 V ILI Ioff
9397 750 14209
Conditions
Min
Typ
Max
Unit
HIGH-level input voltage VCC = 1.65 V to 1.95 V
0.35 x VCC V
input leakage current power-off leakage current
VI = 5.5 V or GND; VCC = 5.5 V VI or VO = 5.5 V; VCC = 0 V
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 -- 30 November 2004
5 of 14
Philips Semiconductors
74LVC1G11
Single 3-input AND gate
Table 8: Static characteristics ...continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter ICC ICC CI VIH Conditions Min Typ 0.1 5 4 Max 10 500 0.7 0.8 0.3 x VCC 0.10 0.70 0.45 0.60 0.80 0.80 100 200 200 5000 Unit A A pF V V V V V V V V V V V V V V V V V V V A A A A quiescent supply current VI = VCC or GND; IO = 0 A; VCC = 5.5 V additional quiescent supply current per pin input capacitance HIGH-level input voltage VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 2.7 V to 3.6 V VCC = 4.5 V to 5.5 V VIL LOW-level input voltage VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 2.7 V to 3.6 V VCC = 4.5 V to 5.5 V VOH HIGH-level output voltage VI = VIH or VIL IO = -100 A; VCC = 1.65 V to 5.5 V IO = -4 mA; VCC = 1.65 V IO = -8 mA; VCC = 2.3 V IO = -12 mA; VCC = 2.7 V IO = -24 mA; VCC = 3.0 V IO = -32 mA; VCC = 4.5 V VOL LOW-level output voltage VI = VIH or VIL IO = 100 A; VCC = 1.65 V to 5.5 V IO = 4 mA; VCC = 1.65 V IO = 8 mA; VCC = 2.3 V IO = 12 mA; VCC = 2.7 V IO = 24 mA; VCC = 3.0 V IO = 32 mA; VCC = 4.5 V ILI Ioff ICC ICC input leakage current power-off leakage current VI = 5.5 V or GND; VCC = 5.5 V VI or VO = 5.5 V; VCC = 0 V VCC - 0.1 0.95 1.7 1.9 2.0 3.4 VI = VCC - 0.6 V; IO = 0 A; VCC = 2.3 V to 5.5 V
Tamb = -40 C to +125 C 0.65 x VCC 1.7 2.0 0.7 x VCC -
0.35 x VCC V
quiescent supply current VI = VCC or GND; IO = 0 A; VCC = 5.5 V additional quiescent supply current per pin VI = VCC - 0.6 V; IO = 0 A; VCC = 2.3 V to 5.5 V
[1]
All typical values are measured at Tamb = 25 C.
9397 750 14209
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 -- 30 November 2004
6 of 14
Philips Semiconductors
74LVC1G11
Single 3-input AND gate
12. Dynamic characteristics
Table 9: Dynamic characteristics GND = 0 V; see Figure 6 for test circuit. Symbol tPHL, tPLH Parameter C [1] see Figure 5 VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 2.7 V VCC = 3.0 V to 3.6 V VCC = 4.5 V to 5.5 V CPD power dissipation capacitance propagation delay A, B and C to Y VCC = 3.3 V
[2] [3]
Conditions
Min
Typ
Max
Unit
Tamb = -40 C to +85
propagation delay A, B and C to Y
1.5 1.0 1.0 1.0 1.0 -
4.7 3.0 3.0 2.6 1.9 13
17.2 6.2 6.0 4.9 3.5 -
ns ns ns ns ns pF
Tamb = -40 C to +125 C tPHL, tPLH see Figure 5 VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 2.7 V VCC = 3.0 V to 3.6 V VCC = 4.5 V to 5.5 V
[1] [2] All typical values are measured at Tamb = 25 C and nominal VCC. CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; (CL x VCC2 x fo) = sum of the outputs. The condition is VI = GND to VCC.
1.5 1.0 1.0 1.0 1.0
-
21.5 7.8 7.5 6.2 4.4
ns ns ns ns ns
[3]
9397 750 14209
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 -- 30 November 2004
7 of 14
Philips Semiconductors
74LVC1G11
Single 3-input AND gate
13. Waveforms
VI A, B, C input GND tPHL VOH Y output VOL tTHL
001aac031
VM
tPLH
VM
Measurement points are given in Table 10. VOL and VOH are typical output voltage drop that occur with the output load.
Fig 5. The input (A, B, C) to output (Y) propagation delays Table 10: VCC 1.65 V to 1.95 V 2.3 V to 2.7 V 2.7 V 3.0 V to 3.6 V 4.5 V to 5.5 V Measurement points Input VM 0.5 x VCC 0.5 x VCC 1.5 V 1.5 V 0.5 x VCC Output VM 0.5 x VCC 0.5 x VCC 1.5 V 1.5 V 0.5 x VCC
Supply voltage
VEXT VCC PULSE GENERATOR VI D.U.T. RT CL RL VO RL
mna616
Test data is given in Table 11. Definitions for test circuit: RL = Load resistor. CL = Load capacitance including jig and probe capacitance RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
Fig 6. Load circuitry for switching times
9397 750 14209
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 -- 30 November 2004
8 of 14
Philips Semiconductors
74LVC1G11
Single 3-input AND gate
Test data Input VI VCC VCC 2.7 V 2.7 V VCC tr = tf 2.0 ns 2.0 ns 2.5 ns 2.5 ns 2.5 ns Load CL 30 pF 30 pF 50 pF 50 pF 50 pF RL 1 k 500 500 500 500 VEXT tPLH, tPHL open open open open open
Table 11: VCC
Supply voltage 1.65 V to 1.95 V 2.3 V to 2.7 V 2.7 V 3.0 V to 3.6 V 4.5 V to 5.5 V
9397 750 14209
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 -- 30 November 2004
9 of 14
Philips Semiconductors
74LVC1G11
Single 3-input AND gate
14. Package outline
Plastic surface mounted package; 6 leads SOT363
D
B
E
A
X
y
HE
vMA
6
5
4
Q
pin 1 index
A
A1
1
e1 e
2
bp
3
wM B detail X Lp
c
0
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max 0.1 bp 0.30 0.20 c 0.25 0.10 D 2.2 1.8 E 1.35 1.15 e 1.3 e1 0.65 HE 2.2 2.0 Lp 0.45 0.15 Q 0.25 0.15 v 0.2 w 0.2 y 0.1
OUTLINE VERSION SOT363
REFERENCES IEC JEDEC JEITA SC-88
EUROPEAN PROJECTION
ISSUE DATE 97-02-28 04-11-08
Fig 7. Package outline SOT363 (SC-88)
9397 750 14209 (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 -- 30 November 2004
10 of 14
Philips Semiconductors
74LVC1G11
Single 3-input AND gate
Plastic surface mounted package; 6 leads
SOT457
D
B
E
A
X
y
HE
vMA
6
5
4
Q
pin 1 index
A A1 c
1
2
3
Lp
e
bp
wM B detail X
0
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.9 A1 0.1 0.013 bp 0.40 0.25 c 0.26 0.10 D 3.1 2.7 E 1.7 1.3 e 0.95 HE 3.0 2.5 Lp 0.6 0.2 Q 0.33 0.23 v 0.2 w 0.2 y 0.1
OUTLINE VERSION SOT457
REFERENCES IEC JEDEC JEITA SC-74
EUROPEAN PROJECTION
ISSUE DATE 01-05-04 04-11-08
Fig 8. Package outline SOT457 (SC-74)
9397 750 14209 (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 -- 30 November 2004
11 of 14
Philips Semiconductors
74LVC1G11
Single 3-input AND gate
15. Revision history
Table 12: Revision history Release date 20041130 Data sheet status Product data sheet Change notice Doc. number 9397 750 14209 Supersedes Document ID 74LVC1G11_1
9397 750 14209
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 -- 30 November 2004
12 of 14
Philips Semiconductors
74LVC1G11
Single 3-input AND gate
16. Data sheet status
Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
III
Product data
Production
[1] [2] [3]
Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
17. Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
18. Disclaimers
Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
19. Contact information
For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
9397 750 14209
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 -- 30 November 2004
13 of 14
Philips Semiconductors
74LVC1G11
Single 3-input AND gate
20. Contents
1 2 3 4 5 6 7 7.1 7.2 8 8.1 9 10 11 12 13 14 15 16 17 18 19 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 3 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3 Functional description . . . . . . . . . . . . . . . . . . . 4 Function table . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Recommended operating conditions. . . . . . . . 5 Static characteristics. . . . . . . . . . . . . . . . . . . . . 5 Dynamic characteristics . . . . . . . . . . . . . . . . . . 7 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 13 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Contact information . . . . . . . . . . . . . . . . . . . . 13
(c) Koninklijke Philips Electronics N.V. 2004
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 30 November 2004 Document number: 9397 750 14209
Published in The Netherlands

▲Up To Search▲

Price & Availability of 74LVC1G11

	To Download 74LVC1G11 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .